1004 Wh battery capacity with stated 3000+ life cycles at 25°C, 0.5C discharge and 80% depth of discharge.
Portable Power Stations
E600 600 W Portable Power Station
OEM supply inquiryVolume-order inquiryModel E600
AMPEXE E600 portable power station with 1004 Wh battery capacity, 600 W AC output, 300 W solar input, and advanced single-cell battery design for mobile power and backup use.
1004 Wh battery capacity with stated 3000+ life cycles at 25°C, 0.5C discharge and 80% depth of discharge.
600 W nominal AC output with 1200 W surge power and pure sine wave output.
500 W AC charging power and up to 300 W solar charging through the XT60 DC input.
Request a quotation
Ask about MOQ, lead time, market versions, packaging, and available OEM options.
Send inquiry[email protected]Copy email addressEmail address copied.Could not copy the email address.
Review the model-specific details.
Compare the listed electrical, mechanical, protection, and integration information before selecting a configuration.
Portable power stations with LiFePO4 batteries for outdoor use, mobile work, emergency backup, and solar charging.
600 W nominal AC output with 1200 W surge power and pure sine wave output.
500 W AC charging power and up to 300 W solar charging through the XT60 DC input.
220 Vac / 50 Hz nominal AC input and output; confirm destination-market configuration.
AC, USB-A, USB-C and two DC5521 outputs for compatible devices.
85% maximum battery-to-AC and AC-to-battery efficiency under the stated test conditions.
240 × 160 × 290 mm dimensions, 10.3 kg weight, air-cooled operation, and 0–40°C operating temperature range.
Model specifications
Technical specifications
Compare electrical, mechanical, operating, and model-specific parameters for the available configurations.
Match the model and market version to the required system configuration before ordering.
Swipe horizontally to compare every model column.
| Specification | E600 |
|---|---|
| Battery capacity | 1004 Wh |
| Battery voltage | 3.2 V nominal; 2.9–3.65 V range |
| Life cycles | 3000+ at 25°C, 0.5C discharge, DOD80% |
| AC input | 500 W; 220 Vac / 50 Hz nominal; 90–264 V range |
| Solar input | 300 W maximum through XT60; 12–55 V; 10 A maximum |
| AC output | 600 W nominal; 1200 W surge; 220 Vac / 50 Hz; 2.7 A nominal |
| AC waveform | Pure sine wave |
| DC outputs | Type-C / USB-A; two DC5521 outputs at 12 V⎓2.5 A |
| Efficiency | 85% maximum battery-to-AC and AC-to-battery |
| Protection | Input overvoltage/undervoltage and recovery, output undervoltage, output overload, over-temperature |
| Dimensions / weight | 240 × 160 × 290 mm; 10.3 kg |
| Operating conditions | Air-cooled; 0–40°C; 10%–90% RH non-condensing |
Select with the complete system in mind.
Start with the application, then confirm electrical fit, environment and order requirements against the selected model.
List the expected loads
Compare normal demand and startup loads with the stated continuous and surge output.
Set the runtime target
Use the stated battery capacity to compare the operating time required for essential devices.
Review charging routes
Confirm that the available AC, solar or vehicle charging method matches the intended preparation routine.
Confirm the market version
Review socket standard, documentation, packaging and included accessories for the destination market.
Confirm the full system, not one feature
The listed BMS, output and charging features apply within quoted operating limits. Confirm device load, startup demand, charging source, socket standard and operating conditions before use.
Ask which current datasheet, user manual, packing list and market-specific order documents apply to the exact quoted configuration.
Prepared power for time away from the grid.
E600 pairs a 1004 Wh battery with 600 W pure sine wave AC output for outdoor equipment, mobile work and practical backup scenarios.
Outdoor power
Use compatible AC, USB and DC devices at camp, in a vehicle setup or at a remote work site.
Solar preparation
Connect a compatible solar array through the XT60 input for up to 300 W solar charging.
OEM supply
Discuss destination-market voltage, frequency, socket, branding and packaging requirements for project supply.
Product gallery
Review the available product views, enclosure details, controls, and installation format.
Discuss the required market configuration.
Use the inquiry to discuss available electrical configurations, branding, packaging, documentation, and project requirements.
Configuration options
Ask which branding, interface, enclosure, and packaging options are available.
Commercial planning
Confirm quantity, lead time, destination market, and documentation.
Related products
